Check out our article on how to reset a Whirlpool refrigerator. If you were having trouble figuring out how to reset some parts of this fridge we have divided the answers into different sections for you...![How to Reset a Whirlpool Refrigerator [Quick Guide] (1)](https://i0.wp.com/refrigeratorsreviewed.com/wp-content/uploads/2020/10/Whirlpool-refrigerator-e1604388979873.jpg?ezimgfmt=ng%3Awebp%2Fngcb19%2Frs%3Adevice%2Frscb19-1 "How to Reset a Whirlpool Refrigerator [Quick Guide] (1)")
Table of contents
Does a Whirlpool refrigerator have a reset button?
Some Whirlpool refrigerator models have buttons that allow you to reset them. These are the refrigerator switches located inside the unit.
Look near the door and you'll find some switches. Hold them down until the refrigerator display goes blank and normal functions resume. However, if your model does not have this button, unplug it for about 30 minutes before plugging it back in.
To reset your Whirlpool refrigerator: Replace the filter light
Follow these steps to reset the filter change indicator on your Whirlpool refrigerator:
1. Press the Options button. This will bring up three options.
2. Select "Reset Filter" from the options provided.
3. Press the confirmation button and wait. After three seconds, a beep will sound indicating that a reset has been performed.
This video explains how to reset the Replace Water Filter Light...
How to reset a Whirlpool refrigerator ice maker
To reset the ice maker on a Whirlpool refrigerator, follow these steps:
Step 1: Set the icemaker's sensor to turn off. You must do this to turn off the water supply to the icemaker. It's safe and not messy.
step 2: Remove the ice tray and locate the reset button on the bottom of the ice maker.
step 3: Press and hold the reset button for about 10 seconds. Release when the ice machine starts spinning again or when you hear a beep inside the machine.
step 4: If your icemaker does not have a reset button, locate the power switch on the icemaker and set it to the "off" position. Then unplug the fridge and leave it unplugged for about 10 minutes.
step 5: Reconnect the refrigerator and the switch will turn on again. This will reset the ice machine. Contact theWhirlpool-Centerfor further assistance if required.
Consult the refrigerator owner's manual to determine how to reset the ice maker on that particular model.
Supco 8 Cube Ice Maker Replacement Kit for Whirlpool, Kenmore, KitchenAid Part No. RIM597
- MODULAR ICE MAKER - This Supco modular ice machine unit is an excellent replacement for the in-door ice makers, including the 626663 (Jacuzzi), 2198678 (Jacuzzi), and 2198597 (Jacuzzi) units
Prices from the Amazon Product Advertising API on:
Product prices and availability are correct as of the date/time shown and are subject to change. All pricing and availability information displayed on [Relevant Amazon Sites] at the time of purchase is for the purchase of this product.
How to reset the defrost timer on a Whirlpool refrigerator
To reset the defrost timer in this unit, go to the back panel of the refrigerator and unscrew it. Unplug the device from the power outlet. Locate the round notch on the defrost timer and use a flat head screwdriver to turn it counterclockwise.
Keep turning it until you hear the refrigerator fan stop. This indicates that the defrost timer has been reset.
How to reset the control board on a Whirlpool refrigerator
To reset the control board of this unit, open the refrigerator door and locate the door switches. Press both switches and the fridge temperature button up to three times within ten seconds.
Release the switches and button and you will see the letter “s” on the freezer compartment control panel. The letter “e” will appear in the refrigerator compartment.
Press the fridge temperature button once. Some numbers will appear on the display with “1” showing on the freezer compartment display. Then if the fridge display goes blank while the freezer shows '1' then the control board has been reset.
Do you need expert help?Use the chat box on this page to speak to a verified device technician instantly.No expensive in-house service calls required. No appointments. No waiting time.
Reset the control panel on the Whirlpool refrigerator
To reset the control panel on your Whirlpool refrigerator, unplug the unit from the electrical outlet. Alternatively, turn off the circuit breaker that controls the refrigerator. Leave the device turned off for about ten minutes before plugging it back in.
This gives the control board and panel time to reset completely. Check the cooling function to make sure it is on before testing the panel. After this reset, normal operation should resume. You can also check the control lock on the control panel to see if it is active, especially if the control panel does not work after the reset.
When the lock is active, you cannot use the control panel and dispenser, although the lights may be on at this time. The lock icon or button may be lit when active, so press it or for about three seconds or until the light turns off. Then try the control panel again.
How do I reset my Whirlpool freezer?
To reset your Whirlpool freezer, unplug the unit from the power supply; Turn off the circuit breaker or unplug the refrigerator from the outlet. Leave it off for about five to ten minutes and turn it back on. Check the freezer control panel to make sure it is working and the cooling function is active after the reset.
How to reset a Whirlpool refrigerator - select models
Below are steps to reset different parts of a Whirlpool Gold refrigerator:
How to reset the control panel on a Whirlpool Gold refrigerator
To reset the control panel on a Whirlpool Gold refrigerator, follow these steps:
1. Turn off the circuit breaker or unplug the refrigerator for 5-10 minutes.
2. Turn on the refrigerator by turning on the circuit breaker or plugging the refrigerator back in.
3. Turn on the cooling function.
4. Check the functionality of the control panel.
How to reset the ice maker on a Whirlpool Gold refrigerator
To reset the ice maker on this unit, locate and remove the ice tray. Once removed, you should see a glowing RED reset button on the bottom of the ice machine. Press and hold this button for 10 seconds.
note: Always get thehelp of a professional technicianif you find the bug too difficult to handle alone. Attempting to repair your fridge yourself could lead to more problems.
Check out these guides on how to reset other fridge brands...
How to Reset an Amana Fridge [In Minutes]
How to reset Fisher and Paykel's refrigerator [in minutes]
See AlsoHow to reset an LG fridge - Breezer FreezerHow to reset the LG fridge - ready to do it yourselfHow to Reset LG Fridge - DaDongWhy isn't my LG fridge making craft ice cream? - Fluid imageHow to reset a Magic Chef fridge [in minutes]
How to Reset a Norcold Fridge [Quick Fix]
How to Reset a Kenwood Fridge Freezer [Quick Fix]
How to Reset a Jenn Air Fridge [In Minutes]
(Video) How do I reset my Whirlpool refrigerator after a power outage?How to Reset a Westinghouse Refrigerator [Quick Fix]
How to Reset a Whirlpool Refrigerator - Related FAQs
1. Can you reset a Whirlpool refrigerator by unplugging it?
You can reset a fridge simply by unplugging it. To do this, unplug the device from the outlet for 30-45 minutes and then turn it on again. This will reset the device and in some cases it may be enough to completely fix an issue.
In principle, all devices can be switched on or off, but the refrigerator cannot be switched off easily.
2. How do I reset my spa water dispenser?
You can reset your spa water dispenser by pressing and holding the "Water Filter" button for three seconds. When the device has been reset, the water filter icon will automatically return to the initial blue color and you will no longer see the "Replace filter" prompt on the display screen.
3. How do I reset my Whirlpool refrigerator after a power outage?
To reset your device after a power outage, press and hold the Power Lock and Filter buttons simultaneously for five seconds. This turns on the cooling function of the refrigerator. Alternatively, you can turn off the refrigerator by unplugging it or turning off the circuit breaker.
Leave it off for a few minutes, between five and ten minutes, to give the compressor and control board time to reset. Then turn the refrigerator back on and make sure the cooling function is active. The refrigerator should resume its normal functions after the reset. Otherwise, refer to the owner's manual or contact Whirlpool to schedule a service.
4. How to reset a Whirlpool refrigerator
Follow these steps to reset a Whirlpool refrigerator:
1. Open the refrigerator door and look for the switches next to it.
2. Press the switches and the temperature button simultaneously up to three times in 10 seconds. This should reset your fridge and freezer.
To find out if the reset was successful, check if a letter "S" appears in the freezer compartment when you release the switches. A letter "E" should also appear on the refrigerator display to indicate that the reset has been performed.
For some other models, the display on the control panel should turn off and resume normal functions within a few seconds. You can also try using the freezer door switch; Hold down until the freezer stops and starts. Consult the refrigerator owner's manual for specific instructions on resetting the refrigerator by model.
Get instant help - ask an experienced verified device technician
Do you need expert help?Click here to use the chat box on this page to speak to a verified device technician instantly. No expensive in-house service calls required. No appointments. No waiting time.